You should have received one package for each element of your Collect Cabinet. 

Download the Collect cabinet manual as PDF


1. Make sure you have an Allen Key 6mm and a Phillips screwdriver at hand.(not included) 


2. Check that every piece of furniture you ordered is in the package.


3. Slide the drawer fully open. You will find an orange element on the bottom of the drawer: push it to lift the drawer out of the cabinet.


4. Place the casing of the drawer down on a soft cloth, facing upwards. First put screw (C) in the casing. Then place the plinth on top and secure it using your Philips screwdriver. 


5. Turn the casing so that it rests on the plinth. ​​​​​​​


6. Place the spacer on top.​​​​​​​


7. Place the second cabinet on top of the spacer and secure with 4x M6 (B). Repeat this step for every other cabinet.​​​​​​​


8. Slide the gliders fully open. Place the drawers on top of the gliders. Push the drawers into the cabinet, you should hear a ‘click’ when they are closed correctly. ​​​​​​​


9. Secure the wooden doorknobs by turning them clockwise on the provided screws.


10. Your Studio Henk Collect Cabinet is ready to be used!