Depending on the cabinet you’ve ordered, you should have recieved a couple of standing shelves, and a couple of horizontal shelves (the difference between the type of shelve is visbale at the bottom of the shelf. The ones with a cutout are meant to stand). Next to that, you’ve recieved Oak wedges, to secure the shelves.

Download the Column cabinet manual as a PDF


1. Check if every part of the Column cabinet you ordered is in your package.


2. Place the standing shelves straight up like on the drawing above. Make sure the vertical shelf cutouts are facing the ceiling, (place something soft underneath the shelves).


3. Slide the first horizontal shelf in the designated cutouts, please do this slowly and carefully, to avoid unnecessary scratches.


4. Place the other shelves just like in step 3.


5. Make sure all shelves are placed in a 90 degree angle. Now you can start with sliding the oak wedges in the designated holes.


6. Place the oak wedges in the cabinet as shown in the illustration. You dont have to use a hammer or other tools. Just push the wedge in with your finger.


7. When you’ve put all oak wedges in the holes, you can now carefully turn the cabinet and place it in the right spot.


8. Make sure the cabinet is stable by adjusting the adjustable feet at the bottom of the frame shelves.


9. Fix the cabinet to the wall. At the back of the frame you can find a keyhole to connect to the wall. For this step you need wall mounting gear.


10. Your new Column Cabinet is ready to use. Enjoy!